SP-JR100 & SP-JR200

Jura Coffee Machine Compatible Filters


Compatible With Jura
Clearyl Blue, 71445, and 67879


Compatible With Jura
Clearyl White, 64553, and 7520

Installation Instructions
  1. Ensure first that you have purchased the c orrect filter for your Jura machine.
    • The SP-JR100 model is compatible with the Clearyl blue line of filters, and has a hexagonal base.
    • The SP-JR200 model is compatible with the Clearyl white line of filters, and has a round base.
  2. Follow the instructions regarding filter changes outlined in the manual for your Jura device.
  3. Begin filter change process on your device touchscreen.
  4. Remove water tank from machine, and empty water.
  5. Remove used filter from water tank. Depending on your machine model, the filter may be held in place by a flap that seals onto the filter’s top. The filter may also be attached to a plastic extender.
  6. Discard used filter. Wash hands, and remove new filter from packaging.
  7. Rinse the new filter under running water for 30 seconds. Carbon fines may flush from the filter, turning the water dark momentarily–this is normal.
  8. Install the filter into your device, pressing the filter down until it is firmly seated. Secure flap, if applicable.
  9. Follow any instructions on your device touchscreen upon successful filter change.
SP-JR100 & SP-JR200 Filter Specifications
Operating Temperature 34°F (1°C) - 100°F (38°C)
Filtration Capacity 50 gallons (189 liters)
Maximum Usage Life 2 Months

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Copyright © 2024 SpiroPure. All Rights Reserved.